Valves

Pneumatic Diaphragm Control Valve

pneumatic_diaphragm_control_valve
Model : CHD & CLD
Actuator : Spring return type, Heavy duty Pneumatic Diaphragm
Type : Normally Close/Open
Size : ½” to 8”
Body : WCB
Diaphragm Cover : M.S. (Steel Metal)
Working Press :150#/300#/600#
Working Temp. : 220°c / 450°c
Seating : Metal to Metal & Soft Seated
Media : Air, Water, Oil, Gas, Steam & Hydraulic Oil

Globe Valve

globe_valve
Model : GLOBE TYPE & ND 40, ND 16
Body : Cast Steel (Astm A216 Gr. WCB)
Int. Parts : S.S. 304 & S.S. 410
Trims : SS 13% Crom (AISI 410)
Class : SA-150#/300#/600#/900#
Ends : Flanged
Size : 15mm to 300mm

Sluice Valve

sluice_valve
Body : C.I. & WCB
Int. Parts : S.S. 304 & Gun Metal
Trims : SS 13% Crom (AISI 410)
Class : SA-150#/300#/600#/900#
Ends : Flanged
Size : 50mm to 200mm

Piston Valve

piston_valve
Body : Cast Steel (Astm A216 Gr. WCB) / C.I.
Trims : SS 13% Crom (AISI 410)
Class : SA-150#/300#/600#/900#
Ends : Flanged
Size : 1” to 6”

Pressure Reducing Valve

pressure_reducing_valve
Body : WCB
Trims : SS 304
Size : 2” to 6”
Operating : Manually
Available : IBR & Non IBR

Swing Check Valve

swing_check_valve
Body : CAST STEEL (ASTM A216 Gr. WCB)
Trims : SS 13% Crom (AISI 410)
Class : ASA-150#/300#/600#/900#
Ends : Flanged
Size : 25mm to 300mm
Available : IBR & Non IBR

Disc Check Valve (DCV)

disc_check_valve
Body : ASTMA 351 GR. CF8 / CF8M
Disc : AISI 304 or AISI 316 (Bar Stock)
Spring : AISI 304 or AISI 316 (Standard Stock)
Disc Seat : Metal to Metal
Spr. Retainer : AISI 304 or AISI 316
Pressure Rating : PN40
Flange Standard : BS 10 Table D, E & H

Safety Valve

safety_valve
Body : C.I., WCB, Gun Metal
Internal Parts : S.S. 304,
Class : 150# / 300#
Ends : Flanged / Screwed
Size : 1/2” to 6”
Available : IBR & Non IBR

Y - Type Control Valve

y_type_control_valve
Body : S/S AISI 304 PRESSED
Int. Parts : S.S. 304 & S.S. 316
Cover : ASTM A351 Gr.CF8 (S/S 304) Investment Die-Cast
Spring : Spring Steel (IS 4454 Gr. III)
Port Connection : 1/4” BSP (NPT on request)
Operating Pressure : 3.5 to 7 Bar
Position Indicator : Nylon
Operating Cycles : 350 to 650 cycles / Hr
Media : Dry Lubricated Air/Innert Gases

Forged Steel Globe Valve

forged_steel_glob_valve
Body : Forged Steel 105, F304, F316, F11, F22
Trims : SS 13% Crom (AISI 410) Stultified
Size : 15mm to 50mm
Class : ASA-800/1500/25003
Available : IBR & Non IBR

Globe Valve (Gun Metal)

globe_valve_gun_metal
Body : Gun Metal
Trims : S.S. 304
Class : 150#/300#
Ends : Screwed
Size : 1/2” to 3”

Butterfly Valve

butterfly_valve
Seat Design : Rubber Lining / Replaceable
Operating : Lever Operated
Body : C.I./C.S. (WCB)
Disc. : C.I./ S.S.304
Design : Lug Type
Size : 40mm to 500mm
Operation : Offset Disc.
Ends : Wafer Type

Ball Valve

ball_valve
Body : WCB / CF8 / CF8M
Design : 2 Pc. / 3 Pc.
Ends : Screwed / Flanged
Size : 1/2” to 10”

Pulp Valve

pulp_valve
Body : C.I. (IS 210Gr. FG 220/260)
S.S. 304 / S.S. 316
Parts : S.S. 13% Cr./ S.S.304 / S.S. 316
Press : 6 kg./cm² Max
Oper. : Manually/Pneumatically/Electrically
Ends : Wafer Type
Size : 40 mm to 500mm

Strainer

strainer
Body : C.I. (IS 210Gr. FG 220/260)
C.I. (ASTM A216 Gr. WCB)
CSS (ASTM A351CF8/CF8M)
Mess : S.S.304 / S.S. 316 / Brass
Type : IBR & Non IBR
Class : ND-40, ASA-150, ASA-300
Ends : Flanged / Screwed/Socketweld
Size : 15 mm to 150mm
Available : IBR & Non IBR

TD - 3 Trap

td_3_trap
Body : S.S. 304
Size : 15mm to 25mm
Ends : Screwed / Socket weld
Max.Intel : 32kg./cm² at 425°C
Min. Press : 0.25 kg./cm²
Available : IBR & Non IBR

Heavy Duty Pneumatics Cylinder

heavy_duty_pneumatics_cylinder
Bore Size : 25mm to 65mm, 75mm to 450mm
Barrel : Aluminum & Stainless Steel
Stroke : up to 2500mm
Piston Rod : En8 with hard chrome plated (25 microns around the shaft)
Piston Rod Dia : 25mm 25mm 32mm 32mm 51mm 51mm 56mm 70mm
Cushioning : Available at both ends
Top/End Cover : Cast Iron

Ball Float Type Steam Trap

ball_float_type_steam_trap
Material : C.I. Greaded
Internal : S.S. 304
Ends : Threaded / Flanged
Size : ½” to 2”

Moisture Separator

moisture_separator
Body : WCB
Type : IBR & Non IBR
Class : ASA-150#/300#
Ends : Flanged
Size : 2” to 6”
Available : IBR & Non IBR

Download Zone

Download Our Catalogue for Super Steam Tech India in PDF Formate.
Go To Download Zone

Company

Established at Ahmedabad, (Gujarat, India), Super Steam Tech India, is one of the renowned manufacturer and supplier of a wide range of Rotary Joint, Industrial Valves, Accessories etc. Owing to their high quality features, these are adequately used for professional applications in the industry.
Read More »

Get In Touch !!!

*Name :
*Mobile :
*E mail :
*Message :

Contact Detail

Address : 339/229/8, Ahmed Hussain’s Chawls, Opp. Water Tank Gate No.2, Dudheshwar Road, Ahmedabad-4, GUJARAT.
Phone : 079-25620006
Mobile : +91-93757 63186
+91-8000002166
E-mail : info@supersteamtechindia.com